73
1.
The illuminant may be damaged.
1.
s. chapter R
EPLACING OF THE
ILLUMINANT
2.
The control system (depending on
model) has disabled the lights due to
the door being kept open too long.
2.
Close and reopen the door to
reactivate the lights.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
T
HE OPERATING CONDITIONS DESCRIBED BELOW ARE NORMAL
AND DO NOT INDICATE A MALFUNCTION
.
❖
The refrigerant generates a sound similar to flowing water.
❖
Sometimes you may hear a sound which is generated by the injection process of
the cooling circuit.
❖
The sides of the appliance may get warm while the appliance is running.
D
ISTINCT NOISE
:
When you operate the appliance for the first time or the temperature falls below
a certain level, the appliance will operate with high power to reach the preset
temperature.
C
ONDENSED WATER IN
/
ON THE APPLIANCE
:
may be generated inside or outside the appliance by high humidity or very warm
ambient temperatures.
C
LICKING
:
You will hear the compressor click if it is activated or deactivated.
H
UM
:
is caused by the compressor while running.
K
NOCKING
/
SNAPPING
:
may be generated by sequential expansion and shrinkage of the components of
the cooling system. It is caused by variation of temperature before and after the
compressor is activated or deactivated.
