45
12. TROUBLE SHOOTING
DANGER!
If your appliance does not seem to run correctly, please contact the shop you
purchased the appliance at.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.
MALFUNCTION
POSSIBLE CAUSE
MEASURE
The appliance
does not
work at all.
The plug of the appliance is
not connected to the socket.
The plug has become loose.
The socket is not supplied with
energy.
The fuse is switched off.
The voltage is too low.
Check
the
corresponding socket
by connecting it with
another appliance.
Check the fuse box.
Compare the data on
the model plate with
the data of your
energy supplier.
The compressor
does not
work at all.
Defrost mode is active.
Incorrect energy supply..
Normal
procedure
while defrosting.
Check the status of
the energy supply.
The compressor
runs for too
long.
The appliance has been
switched off for a while.
Too much or too hot food in
the appliance.
Doors opened too often or
too long.
The appliance needs
some time to reach the
preset temperature.
Remove any hot food.
Do not open the door
too often or too long.
Unsatisfactory
cooling capacity.
The door was frequently
opened.
The door is not correctly
closed.
Encrusted ice inside the
appliance.
The
current
temperature
setting is too warm
Warm or hot food inside the
appliance.
The appliance is overfilled.
The door seals are damaged
Choose a different
setting if necessary.
Strong
formation
of encrusted ice.
The door is not correctly
closed.
The door seal is damaged or
Shut the door.
Clean the door seal
with a soft cloth and