~ 62 ~
H
OW TO INSTALL THE APPLIANCE
1. Push the appliance into the cabinet. The
opening side of the door should be placed as
close as possible to the cabinet wall.
2. Screw a guide to the holes in the side of the
door of the appliance using the short screws.
Insert the slider into the guide, then fully open
and close both the door of the appliance and
cabinet to check that the door of the cabinet
can close completely and smoothly.
1: slider; 2: screws; 3: guide
3. Open both the door of the appliance and
cabinet simultaneously and mark the position
of the slider when it functions well at all angle
positions while closing and opening the door.
Remove the slider from the guide and fix the
slider on the door of the cabinet using two
short screws. Then fix the slider cover.
1: slider; 2: screws
4.
Unscrew the guide from the door of the appliance.
5.
Repeat steps 1 - 4 to fix the three remaining sliders and slider covers.
6. Fit four guides with sliders and fix them using
the short screws. Then fix the guide covers.
1: slider; 2: guide
