~ 88 ~
6.2 Replacing of the illuminant
WARNING!
The LED-illuminant must be replaced by a competent
person
only
. If the LED-illuminant is damaged, please contact a qualified
professional (
not covered by the guarantee
).
NOTICE!
This product contains a LED light source of energy
efficiency class G according to EU-Regulation 2019/2015.
7. Troubleshooting
WARNING!
Before you start troubleshooting, disconnect the appliance
from the mains. Any work not described in this instruction manual must be
carried out by a qualified professional only.
M
ALFUNCTION
P
OSSIBLE CAUSE
M
EASURE
T
HE APPLIANCE DOES NOT WORK AT ALL
.
1.
The plug of the appliance is not
connected to the socket.
2.
The plug has become loose.
3.
The socket is not supplied with
energy.
4.
The fuse is switched off.
5.
The voltage is too low.
1.
Connect the appliance to the mains
properly.
2.
Check the plug.
3.
Check the corresponding socket by
connecting it with another appliance.
4.
Check the fuse box.
5.
Compare the data on the model plate
with the data of your energy supplier.
T
HE COMPRESSOR DOES NOT WORK AT ALL
.
1.
Incorrect energy supply.
1.
Check the energy supply.
T
HE COMPRESSOR OPERATES FOR TOO LONG
.
1.
The appliance has been switched off
for a while.
2.
Too much or too hot food in the
appliance.
3.
Doors opened too often or too long.
1.
The appliance needs some time to
reach the preset temperature.
2.
Remove any hot food.
3.
Do not open the door too often/too
long.
