46
1.
Replacing of the illuminant
2.
WARNING!
Switch off and
unplug
the
appliance
before
replacing the illuminant.
3.
Illuminant-data: 220~240V, 15W
4.
Unscrew the cover.
5.
Press the cover and slide it backwards
6.
Replace the illuminant and reinstall the
cover.
7. Trouble shooting
MALFUNCTION
POSSIBLE CAUSE
MEASURE
The appliance does not work at all.
The plug of the appliance is not
connected to the socket.
The plug has become loose.
The socket is not supplied with
energy.
The fuse is switched off.
The voltage is too low.
Check the corresponding socket by
connecting it with another appliance.
Check the fuse box.
Compare the data on the model
plate with the data of your energy
supplier.
The compressor does not work at all.
Incorrect energy supply.
Check the energy supply.
The compressor operates for too long.
The appliance has been switched off
for a while.
Too much or too hot food in the
appliance.
Doors opened too often or too long.
The appliance needs some time to
reach the preset temperature.
Remove any hot food.
Do not open the door too often/too
long.
Unsatisfactory cooling capacity.
The door was frequently opened.
The door is not properly closed.
Encrusted ice inside the appliance.
The current temperature setting is
too warm
Warm or hot food inside the
appliance.
The appliance is overfilled.
The door seals are damaged.
Select a different setting if necessary.
Check the door/door seals.
Defrost the appliance.
Summary of Contents for KS 117.4 A++ UB
