37
Support the bottom of
the door. Be careful with
the hinges. Remove the
door.
With the hinge open undo
the screws of the top
hinge.
Remove the shutter
covers of the cabinet.
Turn the hinge and fix it
on the opposite side.
Repeat with the other
hinge. Reinstall the
shutter covers. Reinstall
the door.
Check that the door is
adjusted properly. Check
that the door seals close
properly. Finally tighten
the screws.
3.4 Changing of the hinge position (freezer compartment)
Slightly open the freezer compartment door. Using a small screwdriver, press the
spring in the opening of the lower door bearing slightly upwards and take out the
door bearing and the door. Install the cover cap (M) on the opposite side. Turn the
Summary of Contents for KS 117.4 A++ UB
