Installation
Before connecting the appliance, a check must be made to ensure that the appliance and mains leads
are not damaged through transport.
The plugs of the mains leads must be connected only to a properly earthed socket.
Do not use any extension leads or trailing sockets for 230V/50 Hz mains operation!
Damaged mains leads must be replaced only by a qualified person. Refer other
work and repairs ONLY to an authorised TechnikService24-specialist.
Ensure that the fridge stands horizontal on a firm surface to ensure perfect operation. A check can be
made by placing a spirit level on top of the appliance.
The fridge should be installed in a dry and well ventilated room. The appliance is not suitable for
outdoor use. The appliance must be protected from direct sunlight and should not be installed near to
heat sources (oven, radiators, etc.).
To avoid a risk of fire, do not place any electric heating appliances on the fridge. Do not place any
kettles on the fridge as spilt boiling liquids can damage the electrical insulation.
Installation in corners
Push the appliance carefully into the corner and ensure that the fridge stands correctly aligned in the
corner.
Fix the appliance in position at the designated fixing points using the 4 wooden screws as shown in
the diagram below.
= Points of attachment for fixing
the fridge using the already fitted
components A+B and the
supplied wood screws in the
installation corner.
