105
1.
Disconnect the appliance from the power supply
(unplug).
2.
Slightly tilt the appliance back and secure it in this
position. Do not tilt the appliance more than 45
0
!
3.
Remove the screws (1) and then the top metal-panel (6).
Now remove the door. Put the door on a soft surface to
avoid scratches. A second person should assist you.
4.
Unscrew the top hinge axis (5) from the top panel. Now
screw the axis to the left side of the cover panel (6).
5.
To remove the bottom hinge (2) remove the two screws
(8).
6.
Now unscrew the left front foot (4) and fix it on the
opposite right side.
7.
Move the complete bottom hinge (2) together with the
other hinge axis (7) to the opposite left side and fix it
with the two screws (8). Also install the other front foot.
8.
Place the door carefully on the hinge axis (7) of the
bottom hinge. Keep the door properly adjusted. A
second person should assist you.
9.
Place the hinge axis (5) of the top metal-panel (6) into
the corresponding device of the door and fix the
adjusted panel with the screws (1).
10.
Finally check if the door is properly adjusted and can be
properly closed.
