35
Changing of the hinge position
WARNING!
Unplug the appliance before you change the hinge
position. Empty the appliance.
Carry out the change with at least 2 persons.
1.
Remove the 2 covers and screws of the worktop und pull it forward.
2.
Slightly tilt the appliance back and secure it in this position.
3.
Remove the screws of the hinge and the bracket of the hinge axle.
4.
Open the door slightly and pull it downwards from the hinge.
5.
Unscrew the top hinge axle and install it on the opposite side. Put the door on
the axle. Close the door.
6.
Tighten the bracket of the hinge axle with the screws on the opposite side.
Adjust the door properly. The seals must close properly.
Changing of the freezer compartment door
1.
Open the door of the freezer compartment slightly.
2.
Carefully press the spring of the recess with a suitable screwdriver und remove
the pin of the door and the door.
3.
Install sealing plug (M) on the opposite side.
4.
Turn the door by 180
0
und insert the pin in the recess on the bottom.
5.
Lift the door slightly and insert it in the top pin while inserting the bottom pin
in the square opening. Moving the door up and down simplifies the installation.
6.
Clean the appliance before you connect it to the mains.
6. DESCRIPTION OF THE APPLIANCE
