63
4.5 Setting of the temperature
WARNING!
To disconnect the appliance from the mains, you
must
unplug the appliance
or
use a cut-off device.
NOTICE!
If you want to switch off the appliance for a longer period of
time, disconnect it from the mains (unplug!). S. also Chapter 7.
D
ECOMMISSIONING
,
TEMPORARILY
.
The settings of the temperature of both the fridge and freezer can be adjusted
manually by pressing the relevant buttons (button "F
RIDGE
" (A) for the setting
of the temperature of the fridge / button "F
REEZER
" (B) for the setting of the
temperature of the freezer) until the desired values will be indicated (s. chapter
4.3 O
PERATING BUTTONS AND INDICATORS OF THE DISPLAY
).
When you set a temperature, you set an average temperature for the whole
refrigerator. Temperatures inside each area may vary from the set temperature,
depending on how much food you store and where you place them. Ambient
temperature may also affect the actual temperature inside the appliance. When
you set the temperature of both the fridge and freezer, these aspects should be
taken into account.
W
HEN YOU OPERATE THE APPLIANCE FOR THE FIRST TIME
,
THE DEFAULT
TEMPERATURES ARE
:
F
RIDGE
+ 5
0
C
F
REEZER
- 18
0
C
These settings can be changed as needed.
When the ambient temperature is very high, it is recommended to set the
temperature of the fridge and / or freezer to a colder setting if needed. If the
colder setting should cause strong formation of encrusted ice, please select a
lower setting.
High ambient temperatures and simultaneously operating at the coldest setting
may make the compressor operate permanently to keep the temperature
constant inside the appliance.
To perform the following settings the display must be unlocked (s. chapter
4.4 K
EY LOCK
).
