37
After unpacking adjust the adjustable feet. The
feet must touch the ground. The appliance
must be installed properly levelled.
The feet and rollers must stand stable on the
ground to reduce noise emission and
vibrations. If you move the appliance, tighten
the feet anticlockwise so they do not touch the
ground.
Installing of the door handle
1.
To fix the handle push it into the
corresponding holes (direction 1).
2.
Now pull the handle vertically down (direction
2).
3.
Remove the handle in reverse order, so lift the
handle upwards first and then pull it off the
door.
Electrical connection
WARNING!
Do not connect the appliance to the mains
unless you have removed the complete packaging
.
1.
An electrical supply of 220-240V AC / 50 Hz is required.
2.
Connect the appliance to a suitable and dedicated socket only.
3.
For your personal safety, the appliance must be grounded. The appliance is
equipped with a 3-pole grounding plug. Use a suitable socket to minimize the
risk of an electric shock.
4.
Check if the technical data of your energy supply meet the values on the
nameplate.
