68
1.
Turn the micro filter anticlockwise and remove it.
2.
Take out the flat filter.
3.
To install the filters proceed in reverse order.
We recommend to clean the entire filter system once a week.
Remove bigger remnants after each programme.
Clean the coarse and micro filter with a washing-up brush.
Do not knock against the filters as you will damage them. Your appliance will
not work properly if the filters are damaged.
Always install the filters properly.
Improperly installed filters may damage the appliance and dishes.
Spray arms
Clean the spray arms regularly as
chemicals and minerals may clog the
nozzles and bearings.
To remove the spray arm screw off the
nut (anticlockwise). Take off the washer
at the top of the spray arm. Now remove
the spray arm.
Clean the spray arm with warm soapy
water and the nozzles with a soft brush.
Rinse the spray arm with flowing water
and reinstall it.
Control panel and appliance
Clean the control panel with a soft damp cloth and dry it carefully.
Clean the exterior of the appliance with a suitable polish.
Never use sharp-edged items, scouring pads, scouring agents, paper
towels or other abrasive and aggressive detergents to clean any
component of the appliance.
