39
you may damage or brake the glass. Use wash-up liquid and warm water.
5.1 Replacing of the illuminant
WARNING!
Disconnect the appliance from the mains before you
replace the illuminant. RISK OF ELECTRIC SHOCK!
1.
Do not touch the illuminant with your hands. Always wear clean gloves or use a
clean cloth as contamination from your skin can damage the illuminant.
2.
Do not use a screwdriver or any other tool to lever off the illuminant cover;
otherwise you can damage the enamel of the oven or the socket of the
illuminant.
3.
Unscrew and wash the lamp cover and wipe it dry.
4.
Unscrew the light bulb from the socket, replace the bulb. Choose a high
temperature bulb ( 300
℃
) with the following parameters:
Voltage230-240V/50Hz.
Power 25W.
Thread G9.
5.
Do not use any other type of bulb.
6.
Screw the bulb in. Check its proper position in the ceramic socket.
7.
Replace the lamp cover.
According to the EU regulation No. 244/2009, your appliance is classified as a
household appliance in accordance with the ecodesign requirements for non-
directional household lamps. This means that bulbs, which are used in
household appliances, must not be used to illuminate domestic establishments.
5.2 Removing of the door
1.
Open the door and push the safety catch upwards.
2.
Close the door slightly.
3.
Lift the door and pull it towards your direction.
4.
To reassemble proceed in reverse order.
5.
Check that the groove of the hinge bracket is positioned properly in its guide.
6.
After reassembling the door close the safety catch carefully.
7.
If the safety catch is not closed properly you will damage the hinges when
closing the door.
