Assembly of flue spigot
The stove is supplied with a connection flue spigot.
Smoke exist at rear
g) Fit the 45° elbow (Rep B) on the top with its output to the back of the stove.
h) Connect the flue pipe (Rep A) to the elbow
Figure 4
i) The fitting of the outside air inlet (Rep C) is an option.
However if the combustion air is taken in the room where the stove is installed, the
ventilation as indicated page
31
needs to be checked.
Smoke exist at the top
Proceed in the same way by directing the elbow upward.
Figure 5
Eco Minimal 35
N
34
