Planar Bobcat X SN-4045-WX User Manual Download

Page: 103 / 157

Memory Options and Settings

Menu Option/Setting

Description/Settings/Values

In the Recall grid menu, use the arrow keys to navigate through the memories that have something stored in them. The
empty memory slots are grayed out and you can’t land on them. Press

ENTER

to open the Recall detail menu. The detail

menu shows what will be recalled when you press

ENTER

again. When (Current) appears in the Slot to Recall line, it means

that the Bobcat X is already doing exactly what this slot would tell it to do

In the Save grid, use the arrow keys to cycle through the available memories. As you navigate through all 40 memories,
Save Now will show (Overwrite). For each empty memory, the Name of the memory is the default name for this slot. You
can change this name as described at the below. Many lines are grayed out because you can’t change anything here
except the name of the memory. The lines in this menu are different for saving different modes: video or digital. (Overwrite)
appears if the Save to Slot number currently has something saved in it. To save, highlight Save Now and press

ENTER

. A

(Current) notice will appear in Save to Slot to indicate that the save was successful and that the slot now contains exactly
what the Bobcat X is doing now

Name

The name of the saved setting. A default name is created by the unit, which may be changed
by the user

To change the

Name

of a memory slot, highlight Name and press

ENTER

. A bar appears below the name which indicates

character position. Use the + \ – arrows to move the yellow highlight in this bar. Use the up-down arrows to change the
character at that position. There are 24 character spaces available. The default name is an abbreviation of the memory
contents: connector used, resolution, wall configuration and wall position (if wall mode is on)

Source

The type of input: Analog, Digital, Component (YPbPr), S-Video, or Composite

Colorspace

The colorspace of the input, either RGB or YPbPr

Resolution

The image resolution. From 800 x 600 up to the unit’s native resolution

Wall

When Wall is enabled, the first set of numbers are the size of the array and the second set are
the unit’s position in the array, column first, then row

Scale/Justify

The value for Scale Mode value (from Main > Aspect Ratio & Wall > Scale Mode) and the
value for Justify (from Main > Aspect Ratio & Wall > Justify) for this memory slot

Position/Overscan

The position and amount of overscan of the image on the screen. See “Size and Position >
Picture Position” on page 91 and “Overscan” in “Aspect Ratio and Wall Menu Options” on
page 94

Zoom UL/LR

The zoom adjustment settings (see “Size and Position > Picture Position” on page 91)

Viewport UL/LR

The viewport adjustment settings (see “Size and Position > Picture Position” on page 91)

Frequency/Phase

The frequency and phase settings (see “Picture > Source (Analog)” on page 85)

Sharpness

The sharpness setting (see “Picture > Source (Analog)” on page 85)

Black Level
White Level

The values for red, green, and blue that define the Black and White levels for this setting.
(RGB signals). Range is 0-255

Brightness

The brightness of the image. (Composite, S-Video, Component or YPbPr signals only).
Range is 0-255