Clean Pole Installation and User’s Guide (OM720-02) 7
Step 2. Remove the wood strap.
Use the 7/16” wrench to remove the wood strap.
Wood Strap
Step 3. Remove the runners.
Bolt
Remove the front chock
Remove the holding the pallet runners. Swing the runners out to the side while
supporting the front with a pallet truck. Don’t pinch your fingers. Remove the
front chock.
Step 4. Remove the Clean Pole.
.
Wheel Clean Pole down ramp. Be careful – this Clean Pole System is heavy. To prevent
mishap, we suggest two people assist with removing the base from the shipping carton.
