EL552.256-Q2 Operations Manual (OM410-00)
11
Mechanical Specifications
Table 7. Mechanical Specifications
Display External Dimensions
millimeters (inches)
Height
w/o mounting tabs
Width
Depth*
109.73 (4.32)
98.68 (3.885)
176.78 (6.96)
16.26 (0.64)
DC/DC Converter Dimensions
Height
Width
Length
19.05 (0.750)
50.8 (2.0)
133.35 (5.250)
Display Weight
262 grams (0.6 lbs.), nominal
DC/DC Converter Weight
9.33 grams (0.187 lbs.)
Fill Factor
59.2% nominal
Active Area
millimeters (inches)
Width
Height
Diagonal
67.564 (2.660)
145.745 (5.738)
6.33"
Pixel Size
millimeters (inches)
Width
Height
0.203 (0.008)
0.203 (0.008)
Pixel Pitch
millimeters (inches)
Width
Height
0.264 (0.0104)
0.264 (0.0104)
* Without DC/DC Converter
Component Envelope
The component envelope shown in Figure 5 illustrates the distance components
extend behind the display. Tall components do not necessarily fill this area. Planar
reserves the right to relocate components
within
the constraints of the component
envelope without prior customer notification. For this reason, Planar advises users
to design enclosure components to be outside the component envelope.
An air gap of at least 5 mm is recommended to dissipate heat from display
components. Device designers will need to consider their specific system
requirements to determine the necessary spacing.
