19
Touch Screen Driver Installation
Driver Installation Process:
1. Before you start to install the touch driver, please be sure the USB or the
RS-232 Serial cable is connected from the PC or the LCD display.
2. Uninstall any touch screen driver that may be on your system.
3. Click on the driver link found on the CD-ROM.
4. Follow instructions as found below.
5. After installation is complete, click “Finish” and restart your computer to
complete installation.
PT1500MX / PT1550MX Driver Install:
Please Note: The PT1500MX / PT1550MX is available with both RS232
and USB connections. The touch driver is located on the enclosed
CD-ROM for these OS: Windows® VISTA 64/32 bits, XP, 2000, ME, 98,
XP Embedded, Linux, WinCE.NET. If you are using RS232 connection,
follow the instructions below:
1. Be sure that RS232 cable is connected from the computer.
2. Power on the computer.
3. Load the touch screen driver CD.
4. Follow the step-by-step instructions as shown on pop-up windows.
If you are using a PC running Windows
®
, Vista follow the instructions below:
1. Be sure that USB cable is connected from the computer.
2. Power on the computer.
3. No need to install USB driver from the CD as it is a HID device. The system
will recognize the HID device and load the driver automatically.
