19
Wall-Mount Installation Instructions
Attaching The Optional Wall Mount Arm (not supplied)
Follow these steps to finish installing the wall mounting arm:
1. Place the wall mounting arm onto the back of the Touch LED LCD
Monitor. Line up the holes of the arm with the holes in the back of the
monitor.
2. Insert the 4 screws into the holes and tighten.
3. Reconnect the cables. Refer to the User's Guide that came with the
optional wall mounting arm for instructions on attaching it to the wall.
NOTE
200 mmx200 mm VESA high hole (n=4), M6, pitch =1.0 mm
screw mounting kit not included.
M6, Pitch =1.0mm
threaded holes x 4
