background image

 1

Operation Instructions 

Thank you for purchasing this TFT LCD Monitor, a high-resolution multi-scan color TFT LCD 
Monitor. 
Please read this guide thoroughly before installation. 

 
FCC RADIO FREQUENCY INTERFERENCE STATEMENT   
WARNING: (FOR FCC CERTIFIED MODELS)

 

 

This TFT LCD Monitor has been tested and found compliant with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper 
protection against harmful interference to a residential installation. This TFT LCD Monitor 
generates, uses, and can radiate radio frequency energy. Harmful interference to radio 
communication may be led as a result if it‘s not properly installed and used. However, there is no 
guarantee that interference will not occur in a particular installation. If this TFT LCD Monitor does 
cause serious interference to radio or television reception, resetting the TFT LCD Monitor may 
determine it. Moreover, users are encouraged to correct interference by doing one or more of 
the following:   

 

 

Reorient or relocate the receiving antenna. 

 

Move the TFT LCD Monitor and the receiver further away from each other. 

 

Connect the TFT LCD Monitor into an outlet on a circuit different from that to which the 
receiver is connected.

 

 

Consult your local dealer or an qualified technician.

 

 

 

FCC Warning: 

To assure a continued FCC compliance, a user must use a grounded power supply cord and the 
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized 
changes or modifications to this TFT LCD Monitor would void the user‘s authority to operate this 
device. 

 
Note: 

If necessary, shielded interface cables and AC power cord must be used to meet the 

emission level limits.

 

 

Important Recycle Instruction: 

 

Lamp(s) inside this product contain mercury. This product may contain other   

electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in 
accordance with local, state, or federal Laws. For more information, contact the Electronic 
Industries Alliance at WWW.EIAE.ORG. For lamp specific disposal information check 
WWW.LAMPRECYCLE.ORG. 

According to WEEE regulation, this TFT LCD Monitor can't be handled as normal trash in Europe 
when it is out of usage. Please refer to the recycle information from our website to handle it.

 

Summary of Contents for PX2710MW




















Reviews: