Planar PXL2251MW, User Manual

10

FRONT PANEL CONTROL 

•

Power Button:

Press this button to switch ON/OFF monitor’s power. 

•

Power Indicator: 

Blue — Power On mode.
Orange —Off mode.

•

MENU / ENTER :  

Activates OSD menu or function adjust confirm. 

•

ECO/(-)

Activates the ECO control when the OSD is OFF or navigate through adjustment icons  
when OSD is ON or adjust a function when function is activated. 

•

Volume /+ : 

Activates the volume control when the OSD is OFF or navigate through adjustment icons 
when OSD is ON or adjust a function when function is activated. 

•

Source / Auto Adjust / Exit 

When the OSD is OFF, pressing Auto/Source button will toggle between sources.  Press 
continuously to select the input source indicated in the message bar. Press  Menu/Enter 
button to change to the selected source. Auto configure hot key: (VGA input only) When 
the OSD is OFF, press and hold  down the button for 2 seconds to auto configure. When 
OSD menu is ON, this button will act as a Exit Key (Exit OSD menu) 

OSD Lock Function:

 Lock-All 4 buttons are locked except "POWER" button.

To lock the OSD, press and hold the MENU button while the monitor is off and then Press 
power button to turn the monitor on. To un-lock the OSD, press and hold the MENU 
button while the monitor is off and then press power button to turn the monitor on.

NOTES 

 • Do not install the monitor in a location near heat sources such as radiators or air ducts, or 

in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock. 

 • Save the original shipping carton and packing materials, as they will come in handy if you 

ever have to ship your monitor. 

 • For maximum protection, repackage your monitor as it was originally packed at the 

factory. 

 • To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains 

may be removed with a cloth lightly dampened with a mild detergent solution. Never use 
strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage 
the cabinet. As a safety precaution, always unplug the monitor before cleaning it. 

 • Do not scratch the screen with hard things,  it may cause permanent damage. 
 • Don’t leak liquid into monitor which will result in the damage of component.