11
USB Connection
Connect one end of a USB cable to a monitor and the other end to your computer.
Note: To utilize the USB Type A ports, ensure your computer is connected to the Type B.
To comply with International energy standards, the USB hub/ports of this display are
disabled during Standby and Off modes. Connected USB devices will not work in this state.
To permanently put the USB function in "ON" state, please go to OSD Menu, then select "USB
standby mode", and switch it to "ON" state. In OSD-->Extra-->USB Standby Power-->On/Off
Turning off the monitor via power switch will power Off all the USB ports.
ADJUSTING THE VIEWING ANGLE
• For optimal viewing it is recommended to look at the full face of the monitor, then adjust
the monitor’s angle to your own preference.
• Hold the stand so you do not topple the monitor when you change the monitor’s angle.
• You are able to adjust the monitor’s swivel from -30° to 30°.
• You are able to adjust the monitor’s tilt from -5° to 20°.
• You are able to adjust the monitor’s pivot from -90° to 90°.
Swivel
Tilt
Pivot
-30
。
30
。
-5
。
20
。
90
。
-90
。
Figure 4
NOTES
• Do not touch the screen when you change the angle. It may cause damage or break the
screen.
• Careful attention is required not to catch your fingers or hands when you change the
angle.
