background image

7

This product will start to record once it is connected with the car battery or when you turn on the engine via a 
cigar plug connection. You can stop recording by unplug the direct power cable or pressing the power button of 
the product (temporarily) or turning off the engine (cigar plug connection). Then, consequently, it saves the last 
recording scenes and ends operating. If the product is directly connected with the car battery, it may restart 
recording once it gets a certain voltage of the power from the car battery. If the voltage of your car battery goes 
below a certain set point, it will turn off the product to prevent your car battery to go flat (Battery Protection 
Mode).

If there is a lack of memory space of the SD card, it will overwrite the latest data on top of the existing data. For 
instance, the oldest normal recording data will be deleted and the latest recording data will be saved. In case of 
event recording data, it deletes the data depends on the importance and time frame of the data.

Note: GPS Satellite Reception

ƒ

The GPS may lose reception in areas where high-rise buildings are present. Stop 

at a location where your GPS can regain its reception, before proceeding again.

ƒ

Extreme weather conditions may interfere with the GPS reception. The operating 

temperature should remain between 0~50

.

ƒ

GPS may take longer to connect when turning on the product for the first time, or 

if the product has not been used for more than 3 days.

1. Product Information

Summary of Contents for PH2s



































Reviews: