5 Mega-pixel Vandalproof IR PoE IP Camera
ICA-E5550V
33
date and time. The automatic way can be used only if the camera has an access to NTP
servers. If you are using an isolated Local Area Network without Internet access, you can only
use Manual date and time adjustment mode.
When choosing
SNTP/NTP Server
for automatic date and time updating, you can key-in the IP
address of the NTP server and the time interval for automatic time synchronization. If you want
to key-in the domain name of NTP server instead, please make sure the DNS server IP
address has been set under IP Settings; otherwise, the camera will not be able to resolve the
domain name of the NTP server.
If all the cameras are getting the date and time from the same NTP Server, you can be most
sure that the video clips from different cameras can be well synchronized later for comparison
purposes.
To choose the most suitable NTP Server to synchronize date and time with, please refer to the
worldwide pool of NTP Servers:
When choosing
Set Manually
mode, you can adjust the date and time by the select boxes.
Choose the appropriate
Time Zone
from the select box, too. If your location is not listed there,
then pick any of the listed zones which GMT is identical with your location.
For the countries with daylight saving policy, there is
Day Light Saving
function with two
different types:
Type 1
– define the starting or ending time of daylight saving period by the
number of the
week in the month
(First, Second, Third or Last week).
Type 2
– define the starting or ending time of daylight saving period by the
exact date in the
month
(1-31).
Whether to choose Type 1 or Type 2, please refer to the daylight saving policy of given country.
After changing any of the items above, press Apply to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.
