5 Mega-pixel Vandalproof IR PoE IP Camera
ICA-E5550V
60
Privacy Mask Setup
This function puts blocks over parts of the cameras view that should not been seen.It is
possible to set up up to 4 regions of privacy masks. The adjustment of the privacy mask region
can be done when region is checked under “Setup“ column.
You may resize and drag the region the same way as the motion detection regions: upper bar
that contains the number of the region can be used for dragging the region across the video
while the white box at the right lower corner of the privacy mask region can be used for
resizing the region.
There are 4 pre-defined color options for privacy masks. If the user wants to use any other
colors, please use URL commands to set up the privacy mask instead. To do that, please refer
to the Guide that explains the use of URL commands.
When switching back to live view, the privacy mask would look like this:
Please note that the Text Overlay (OSD) and Privacy Masks will take effect for both Stream 1
and Stream 2.
