23
3. Web-based Management
This chapter provides setup details of the Internet Camera’s Web-based Interface.
3.1 Introduction
The Internet Camera can be configured with your Web Browser. Before configure, please make
sure your PC is under the same IP segment with Internet Camera.
3.2 Connecting to Internet Camera
Use the following procedure to establish a connection from your PC to the Internet Camera.
Once connected, you can add the camera to your Browser’s Favorites or Bookmarks.
Start the web browser on the computer and type the IP address of the camera.
The Default IP: “
“
The login window of Internet Camera will appear,
Default login
username/password
is:
admin
/ <no password>
NOTE:
If the User name and Password have been changed with PLANET IP Wizard II,
please enter the new User name and Password here.
After logged on, you should see the following messages at the top of Internet Explorer:
