White Balance:
Auto:
will adjust the white balance automatically.
Hold:
will hold the white balance.
Exposure Control:
Auto:
will adjust the internal gain automatically.
Hold:
will hold the internal gain.
Color Level
Large value will be colorful.
Brightness:
Large value will brighten camera.
Sharpness:
Large value will sharpen camera.
Contrast:
Large value will contrast camera heavily.
Night Mode:
User can turn Auto or Off of the night mode. This function is very
useful under low illumination environment.
De-Noise:
De-Noise can remove or lower unwanted noise and preserve fine
details and edges.
ICR:
This is an optional function by model. In case, the camera is
built-in ICR, user can configure these parameters to control ICR
function. There are 4 modes of ICR: Night, Day, Auto and
Schedule. In case the Auto mode is selected, user needs to
specify 3 parameters in advance:
Night Mode Threshold (0~10000)
:
this value set the threshold to activate night mode. It should be
lower or equal to Day Mode Threshold.
Day Mode Threshold (0~10000):
this value set the threshold to activate day mode. It should be
higher or equal to Night Mode Threshold.
Delay Time:
The delay time between ICR switching.
Note
that Current Value is the current luminance from the
captured video. It
’
s a useful reference to set Day/Night Mode
Threshold.
47
