White Balance:
Auto: will adjust the white balance automatically.
Hold: will hold the white balance.
Exposure Control:
Auto: will adjust the internal gain automatically.
Hold: will hold the internal gain.
Brightness:
Large value will brighten camera.
Sharpness:
Large value will sharpen camera.
Contrast:
Large value will contrast camera heavily.
Night Mode:
User can turn Auto or Off of the night mode. This function is very
useful under low illumination environment.
White-Light LED:
User can turn On, Off or Schedule of the built-in White-light LEDs.
This function is very useful under low illumination environment
even 0 Lux.
Current Value:
You can press the “Refresh” to know the current light value.
LED On Threshold:
When light value lower than this value, LED will on.
LED Off Threshold:
When light value higher than this value, LED will off.
Delay Time:
It defines how many times the IP camera will compare the light
value. For example, the default value 10 is mean the system will
check the time value 10 times, when the value is lower or higher
than the configured LED On/Off Threshold, the LED will active On
or Off.
De-Noise
De-Noise can remove or lower unwanted noise and preserve fine
details and edges.
49
