Industrial 5-Port 10/100/1000T VPN Security Gateway
IVR-100
- 64 -
4.6.3 IP Filtering
IP Filtering is used to deny LAN users from accessing the public IP address on internet as shown in
Figure 4-32
. To begin blocking access to an IP address, enable IP Filtering and enter the IP address of
the web site you wish to block.
Figure 4-32:
IP Filtering
Object
Description
IP Filtering
Set the function as enable or disable.
Add IP Filtering Rule
Go to the Add Filtering Rule page to add a new rule.
Figure 4-33:
IP Filter Rule Setting
Object
Description
Enable
Set the rule as enable or disable.
Source IP Address
Input the IP address of LAN user (such as PC or laptop) which you
want to control.
Anywhere (of source IP
Address)
Check the box if you want to control all LAN users.
Destination IP Address
Input the IP address of web site which you want to block.
