Multi-Homing Security Gateway User’s Manual
Username:
Enter your user name.
Password:
Enter your password.
Retype Password:
Retype your password.
PPTP Client IP:
Enter the PPTP Client IP provided by your ISP.
PPTP Client IP Netmask:
Enter the PPTP Client IP Netmask provided by your ISP.
PPTP Client IP Gateway:
Enter the PPTP Client IP Gateway provided by your ISP.
PPTP Server IP:
Enter the PPTP Server IP provided by your ISP.
Connection:
Select whether the connection should
Always Connect
or
Trigger on Demand
.
- Always Connect:
If you want the router to establish a PPTP session when starting up and to
automatically re-establish the PPTP session when disconnected by the ISP.
- Trigger on Demand:
If you want to establish a PPTP session only when there is a packet requesting
access to the Internet (i.e. when a program on your computer attempts to access
the Internet).
Idle Time:
Auto-disconnect the router when there is no activity on the line for a predetermined period of
time. Select the idle time from the drop down menu. Active if
Trigger on Demand
is selected.
Click
Apply
to save your changes. To reset to defaults, click
Reset
.
4.3.5 Big Pond
Username:
Enter your user name.
Password:
Enter your password.
Retype Password:
Retype your password.
Login Server:
Enter the IP of the Login server provided by your ISP.
Click
Apply
to save your changes. To reset to defaults, click
Reset
.
For detailed instructions on configuring WAN settings, please refer to the
WAN
section of this chapter.
- 36 -
