2
Before You Begin
It
’
s best to use a computer with an Ethernet adapter for configuring the MH-5000.
The default IP address for the MH-5000 is
192.168.1.254
(LAN1 at the port number
4) with a Subnet Mask of
255.255.255.0
. You will need to assign your computer a
Static IP address within the same range as the MH-5000
’
s IP address, say
192.168.1.2 to configure the MH-5000.
Device default value
You should have an Internet account already set up and have been given most of
the following information as the following table. Fill out this table when you edit the
web configuration of MH-5000.
Items
Default value
New value
Password:
admin
IP Address
____.____.____.____
Subnet Mask
____.____.____.____
Gateway IP
____.____.____.____
Primary DNS
____.____.____.____
Fixed IP
Secondary DNS
____.____.____.____
PPPoE Username
____.____.____.____
PPPoE
PPPoE Password
____.____.____.____
WAN1
(Port 1)
DHCP
Not initialized
IP Address
____.____.____.____
Subnet Mask
____.____.____.____
Gateway IP
____.____.____.____
Primary DNS
____.____.____.____
Fixed IP
Secondary DNS
____.____.____.____
PPPoE Username
____.____.____.____
PPPoE
PPPoE Password
____.____.____.____
WAN2
(Port 2)
DHCP
Not initialized
IP Address
10.1.1.254
____.____.____.____
DMZ1(Port 3)
IP Subnet Mask
255.255.255.0
____.____.____.____
IP Address
192.168.1.254
____.____.____.____
LAN1(Port 4)
IP Subnet Mask
255.255.255.0
____.____.____.____
IP Address
192.168.2.254
____.____.____.____
LAN2(Port 5)
IP Subnet Mask
255.255.255.0
____.____.____.____
