4
Connecting the MH-5000
A.
First, connect the power cord to the
Power Socket
at the back
panel of the MH-5000 and then plug the other end of the power
adapter to a wall outlet or power strip. Press the switch to ON
position. The Power LED will turn
ON
to indicate proper operation.
B.
Using an Ethernet cable, insert one end of the cable to the
WAN
port
on the front panel of the MH-5000 and the other end of the
cable to a DSL / Cable modem or other internet access devices.
C.
Computers with an Ethernet adapter can be directly connected to
any of the
LAN ports
using a
cross-over
Ethernet cable.
D.
Computers that act as servers to provide Internet services should
be connected to the
DMZ port
using an Ethernet Cable.