5
Using the Setup Wizard
A computer on your LAN1 must be assigned an IP address and subnet mask from
the same range as the IP address and subnet mask assigned to the MH-5000, in
order to be able to make an HTTPS connection using a web browser. The MH-5000
is assigned an IP address of 192.168.1.254 with a subnet mask of 255.255.255.0 by
default. The computer that will be used to configure the MH-5000 must be assigned
an IP address between 192.168.1.1 and 192.168.1.253 with a subnet mask of
255.255.255.0 to be able to connect to the MH-5000. This address range can be
changed later. There are instructions in the MH-5000 User
’
s Guide, if you do not
know how to set the IP address and subnet mask for your computer.
Step 1
－
Login
Type
“
admin
”
in the
account field,
“
admin
”
in
the Password field and
click Login.
Step 2
－
Run
Setup Wizard
Click the
Run Setup
Wizard
.
After login to MH-5000 web configuration
BASIC SETUP > Wizard
Open your Web browser
and
type
“
http://192.168.1.254:8080
”
or
“
https://192.168.1.254
”
into the
URL address box. Then press the
Enter
or
Return
key.
