MH-5001 User Manual
Appendix C
System Log Syntax
225
Appendix C
System Log Syntax
In the MH-5001, all the administration action will be logged by the system. You can refer all your management process through
System log (DEVICE STATUS > System Logs > System Access Logs). Besides, all the system log descriptions are following the
same syntax format.
In the below diagram, you can view the example of system log. The amplified system log example can be divided into 4 parts. The
first part is
Component type
, second part is
Log ID
, third part is
log description
and final part is
Event ID
. When you applied
each setting in the MH-5001, you had been issued an Event. So the same
Event ID
may have many different Log IDs because you
may change different settings in the same apply action. The
Event ID
is a sequence number. It means that the same
Log ID
would
not be assigned the same
Event ID
every time.
So if you apply any button while setting MH-5001 every time, an “Event” will occur immediately. And the “Event” will be
displayed in the System log.
Figure D-1 All the system log descriptions are following the same format as above
In the following table, we list all the system logs for reference.
Component type
Log ID
Log description
Example
AUTH: [A01] admin login success (192.168.17.102:443).
AUTH: [A01] admin login fail, miss password
(192.168.17.102:443).
AUTH: [A01] admin login fail, configuration is locked by
administrator from Console (192.168.17.102:443).
A01 User
Login
AUTH: [A01] admin login fail, configuration is locked by
another user from 192.168.17.100 (192.168.17.102:443).
A02
User Logout
AUTH: [A02] admin logout (192.168.17.102:443).
AUTH
A03
Change Password
AUTH: [A03] admin change system password
(192.168.17.102:443).
BANDWIDTH: [B01] Enable bandwidth management by admin
(192.168.17.100:443).
BANDWIDTH
B01 Enable/Disable
Bandwidth
Management
BANDWIDTH: [B01] Disable bandwidth management by admin
(192.168.17.100:443).
ROUTING
: [R3]
LAN1: Routing Protocol: None. EventID: 158
Component type : Log ID
: Log Description
: Event ID
