1. Choose an Installation Site
Select a suitable place to install the VC-301.
2. Connect RJ-45 Cables
Uses the supplied RJ-45 cable connects to PC with the
Ethernet port of VC-301. Both 10Base-T and 100Base-TX
connections can be used simultaneously.
If required, using a standard RJ-45 cable connect to Ethernet
port of VC-301 with a normal Hub.
Ethernet port of VC-301 will automatically function as an
"Uplink" port when required.
3. Connect RJ-11 Cable
Uses the supplied RJ-11cable connects to VC-301with your
phone company.
4. Power Up
Uses the supplied power adapter connects to VC-301. Please
use same power adapter we provided. Using a different one
may cause hardware damage.
5. Check the LEDs
•
The PWR LED should be ON.
•
For LAN connection, the LAN LED should be ON (the provided
PC is also ON.)
•
The Link LED should be ON if VDSL2 line is connected.
Further Information
If you have any other questions, please contact
the
dealer
where you purchased this product or
you can contact PLANET directly at the following
email address:
support@planet.com.tw
