4. Web-based Management
This chapter provides setup details of the NAS’s Web-based Interface.
4.1 Introduction
This Chapter describes using the Web-based Administration interface.
For details on using the Windows utility, see the Basic Installation & Setup Chapter.
4.2 The Web-based Administrator Interface
To access the Administration interface, click the "Administration" link on the home page.
You will then be prompted for a password, as shown below.
Enter “admin” for the name, and leave the password blank.
z
To gain access, you must enter the User Name and Password of a user in the
"Administrators" User Group.
z
By default, the only user in the "Administrators" User Group is "admin". (You can
add other users as you wish.)
z
The default password for the "admin" user is blank (no password).
This should be changed. Click the User Password link on the Home Page to
change the password.
The "Users" screen will be displayed, as described in the following section. Use the menu tabs
to select the other screens as desired.
23
