network.
Use WPS
Select "
Yes
" to enable WPS function, Select "
No
"
to disable WPS.
3.4.3.4 WPS Settings
Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless
network clients and this router. You don’t have to select encryption mode and input a
long encryption pass phrase every time when you need to setup a wireless client, you
only have to press a button on wireless client and this wireless router, and the WPS will
do the setup for you.
This router supports two types of WPS: Push-Button Configuration (PBC), and PIN
code.
If you want to use PBC, you have to switch this wireless router to WPS mode and
push a specific button on the wireless client to start WPS mode. You can push
Reset/WPS button of this router, or select “PBC” and click “Start WPS” button in
the WPS setup page to do this.
If you want to use PIN code, you have to know the PIN code of wireless client and
switch it to WPS mode, then set the PIN code of the wireless client you wish to
connect to this router in the WPS setup page and click “Start WPS” button to start
WPS mode.
The following table describes the labels in this screen.
Parameter Description
WPS state
If the wireless security (encryption) function of
39
Summary of Contents for 802.11n Wireless ADSL 2/2+ Router ADN-4000
Page 1: ...802 11n Wireless ADSL 2 2 Router ADN 4000 User s Manual ...
Page 6: ...Appendix A Glossary 85 ...
Page 16: ......
Page 19: ...Home Screen 19 ...
