.
.
User’s manual
63
8.6 Control
In this section you can define how the camera will react to recovery from
power down, long release from control, and make adjustment to image.
Auto Resume
To decide whether camera will go auto-run after
manual control stops for certain time. First you
decide if you want to drive the camera into
AUTO-RUN with ON / OFF selection, then you
choose what type of auto-run and how long the
camera will start doing it after control stops.
ON / OFF to turn this function on or shut it off
Mode
the AUTO-RUN type you want to have.
6 modes are in option list::
Auto-pan
(two spots)
, Auto-scan
(all presets)
, Group
scan
(one of the 4 groups)
, Tour-scan
(mixed groups)
and Patrol
(selected presets
)
Time
how long before the auto-run will go. Options are
1, 2, 3, 4, 5 and 10 minutes.
Power-on resume
When this function is set ON and after power
retrieves from breaking, this camera will
automatically go the state it was running before
power went down.
Preset Freeze
This will keep image at rest when camera is
running from one preset to another. It is useful if
motion detection is set up in your DVR or you
have network surveillance.
(a moving picture will cause false alarm)
Image Flip
To turn the image up side down and left to right.
Return
Back to the main menu
Summary of Contents for CAM-ISD52
Page 1: ...23x Indoor Speed Dome Camera CAM ISD52 User s Manual ...
Page 2: ......
Page 49: ... User s manual 48 ...
