19
If external alarm sensor(s) be triggered, beep sound from buzzer
would be occurred during two seconds
while choosing ENABLE.
MOTION SETUP
DVR has built-in video motion detection function. Motion detection area can be selected separately for
each camera. When your DVR detects motions, it begins to record multiplexed video signals from the
camera which motion is detected and display that camera image with up to 30 seconds while selecting
POP-UP DISPLAY
è
On. (Refer to the section
DISPLAY SETUP
à
POP-UP DISPLAY
)
To access MOTION SETUP, using
DOWN
or
UP
button to select the item in MAIN MENU, then press
ENTER
into setup menu when MOTION SETUP is highlighted with blue color. The menu below will
appear on monitor.
1) SENSITIVITY:
5 steps (very low, low, normal, high, very high)
DVR supports 5 sensitivity levels. Higher sensitivity will detection motions easily even there is a brightness
change. It can be selected using
LEFT
or
RIGHT
button.
2) FRAME RATE:
60, 30, 15, 10, 5, 1, 0.5 IPS.(NTSC)
50, 25, 12, 10, 5, 1, 0.5 IPS. (PAL)
The recording frame rate after motion is detected. It can be selected using
LEFT
or
RIGHT
button.
3) DURATION:
It defines recording duration after motion is detected. This DVR support 10 ,30sec,
1,2,3,4,5,6,7,8,9,10,20,30,40,50,60 minutes. It can be selected using
LEFT
or
RIGHT
▲
▼
◀
▶
EXIT
ENTER
:
DISABLE
BUZZER
ALERT
8
:
DISABLE
:
DISABLE
:
DISABLE
:
DISABLE
: 1 MIN
: 60/ IPS
: normal
SENSITIVITY
1
CAM4
7
CAM3
6
CAM2
5
CAM1
4
DURATION
3
FRAME RATE
2
MOTION SETUP
Summary of Contents for DVR-450
Page 1: ...1 Triplex Digital Video Recorder DVR 450 User s manual...
Page 41: ...38 3 When the following dialog box appears click Next...
Page 43: ...40 6 Please click Next 7 Installation is finished...
Page 52: ...49 5 The saved file can be opened in any computer using any graph editing software...
