20
button.
4) CAM1, CAM2, CAM3, CAM4:
DISABLE/ ALL/ SETUP
DISABLE
means that function of motion detection is unavailable.
ALL
means that entire image area is selected for motion detection.
SETUP
can determine image area where want to be monitored. Total motion area consists of 14x10
blocks. To select arbitrary motion zone, select
SETUP
using
LEFT
or
RIGHT
button. And then press
ENTER
button to designate motion areas in 14x10 blocks. You can use
LEFT
or
RIGHT
button for
horizontal movement
UP
or
DOWN
button for vertical movement,
ENTER
button for selection. User can
define the area of the image where you don
’
t want to detect motion and vice versa.
Selected blocks in 14x10 blocks will be blinking and those areas are NOT used for motion detection
areas.
To remove previous defined image blocks for motion detection, press
ENTER
button again at the specific
blinking block. Finish defining motion detection zone, press
MENU/ESC
button to return to upper Menu.
Motion detection zone is the area which edge of the motion blocks is not flickering.
< The example of motion area setup >
5) BUZZER ALERT:
DISABLE/ ENABLE
If motions are detected in decided motion detection area, beep sound from buzzer by
would be occurred
during two seconds by selecting ENABLE.
Summary of Contents for DVR-450
Page 1: ...1 Triplex Digital Video Recorder DVR 450 User s manual...
Page 41: ...38 3 When the following dialog box appears click Next...
Page 43: ...40 6 Please click Next 7 Installation is finished...
Page 52: ...49 5 The saved file can be opened in any computer using any graph editing software...