3
Chapter 2
Hardware Installation
2.1 Package Contents
Please check whether the following items are in your package :
•
ENW-3502-T, PCMCIA 10Mbps Ethernet Card
•
Ethernet adapter cable with 15-pin flat connector at one end and
female RJ-45 connector at the other end for 10Base-T
connectivity.
•
Plastic protective adapter case
•
Driver Diskette (Device drivers, User’s manual)
2.2 Hardware Description
The PCMCIA 10Mbps Ethernet Card is encased in a stainless compact
frame that is easily transportable. It has a 68-pin connector and a 15-pin
flat connector for attaching to the Notebook and Ethernet adapter cable
respectively .
2.3 Installing the ENW-3502-T 10Mbps Ethernet PC Card
Follow the procedure below to install the PCMCIA 10Mbps Ethernet
Card.
1. Turn off the host computer.
2. With the card’s 68-pin connector facing the PCMCIA slot, slide the
card all the way into the PCMCIA slot.
Do not force the
connection.
3. Plug the Ethernet adapter cable to the 15-pin connector on the card.
4. Connect the Ethernet adapter cable to a network. If there is an
Ethernet Hub or RJ-45 phone jack connected to a network and is
near by your notebook, you can connect the Ethernet adapter cable to
a port on the Hub or to the RJ-45 phone jack with another male-to-
male RJ-45 line or connector.