set flowcontrol [n]
enable/disable
Enable/Disable the flow control function to specific port [n] of GSW-2416SF.
set vlantag [n]
enable/disable
Enable/Disable the VLAN Tagging to specific egress port of GSW-2416SF.
set vlanaware [n]
enable/disable
Enable/Disable VLAN-Aware function to specific port of GSW-2416SF.
set priority [n] [m]
Allow to configure the priority setting of GSW-2416SF.
set pvid [n] [m]
Assign PVID on each port of GSW-2416SF.
set vid [n] [m]
Assign VLAN ID [m] to specific VLAN Group [n]
set IP xxx.xxx.xxx.xxx,
mmm. mmm, mmm, mmm,
ggg.ggg.ggg.ggg
Assign IP address, subnet mask, gateway of GSW-2416SF.
set pass [oldpass]
[newpass]
Change the default password of GSW-2416SF, the maximum length is 8
characters.
factory default
Reset the GSW-2416SF to factory default mode.
reboot
Reboot the GSW-2416SF.
logout
Logout console interface of GSW-2416SF.
Table 4-1
Detail description of GSW-2416SF available commands
#
Notice:
Only accept command in lowercase letter under console interface.
4.4.2 Show command
From the main menu screen
(see Figure 4-3)
, input
“show”
and press enter. The show command list screen in
Figure 4-5
appears.
This s
ist contains el
sho
ase refer to
chap
Figure 4-5
Show command list screen
how command l
even items:
w port :
Ple
ter 4.4.2.1
.
sho
:
Please refer to
c
w static [n]
hapter 4.4.2.2
.
show vlan :
Please refer to
chapter 4.4.2.3
.
sho
refer to
chapter
w ip :
Please
4.4.2.4.
sho
lease refer to
ch
w version :
P
apter 4.4.2.5
.
EM-GSW2416SFv1
- 15 -
