background image

– 1 –

– 2 –

1. Package Contents

Thank you for choosing PLANET HDP-1160PT. Before installing the door 
phone, please verify the contents inside the package box.

The package should contain the following items:

The Vandalproof Door 

Phone

Quick Installation 

Guide

Mounting Label

Screw Kit

Connector

Wrench

2. Physical Specifications

Dimensions (W x D x H)

120 x 34 x 195 mm

Weight

1015g (gross weight)

2.1 Front Panel

IR LED

Speaker

Camera

DSS key

Mic

Interface

Description

IR LED

The door phone provides 3 IR LEDs for clear image in low 
light condition.

Camera

The door phone has a built-in IP camera supporting a 
high-resolution video of up to 1280 x 720 pixels.

Speaker

The door phone has a built-in speaker for convenient 
communication and alert use.

DSS Key

Press the Direct Station Selection key to check who the 
caller is before opening the doors, or talking to him/her.

Mic

The door phone has a built-in microphone hidden in the 
pinhole located on the front panel.

2.2 Function key LED state

Type

LED

State

DSS Key 
(Speed dial 
button)

Normally on

Successfully registered

Quick flashing

Registration failed/network abnormal

Slow flashing

In call

2.3 I/O Control Description

Open  the  rear  case  of  the  device  and  find  a  row  of  terminal  blocks  for 

connecting the power supply, electric lock control, etc. The connections 
are shown in the table below:

Number Description

Wiring port 

description

(example above)

1

Ethernet interface: Standard RJ45 

interface, 10/100M adaptive, it is 

recommended to use Cat 5e cable

-

2

Power interface: DC 12V, 1A input

Left: positive (+)

Right: grounded (–)

3, 5

Two groups of short-circuit input 

detection interfaces: For connecting 

switches, infrared probes, door magnets, 

vibration sensors and other input 

devices

Left: IN

Right: OUT

Reviews: