Chapter 1 Overview
This user’s guide explains how to operate the Network Camera from a computer. This
user’s guide is written to be read on the computer display. However, users might
consider printing it out to access easily and read it before you operate the Network
Camera.
1.1 Introduction
This Network Camera is an inexpensive and fully scalable surveillance technology.
Because the Network Cameras can be plugged in to your existing computer network
infrastructure, you will potentially save thousands of dollars on unnecessary cabling.
The Network Camera is accessible via the LAN / WLAN or Internet connection. Connect
your Network Camera directly to a computer network or DSL modem, and with a
standard Web browser you get instant, on demand video streams. Within minutes you
can set up the Network Camera to capture a video sequence to a PC. Live video image
can be uploaded to a website for the world to see or made available only to select users
on the network.
1.2 Features:
z
MPEG4 / JPEG dual video compression
z
6 high-light IR LEDs for 0 Lux operation
z
High quality 1/4” CMOS image sensor
z
Pre recording for motion triggered up to 15 seconds
z
Wired and Wireless LAN interface
z
Up to 400% digital zoom
z
Built-in internal microphone
z
Remote-Control via Internet Explorer
z
Support statistic and dynamic IP address
z
DDNS
and
UPnP
z
Multi-channel control software for surveillance application
z
On-line firmware upgrade
5/60
