2
Input the password (default:
admin
) and click
OK
to configure the
camera’s network and security setting:
In
Lan Setting
page, user can configure camera’s network settings.
Select DHCP to set the camera to obtain an IP address from
DHCP
server on local area network automatically, and select
Manual IP
to
input the IP address information manually. Click
OK
to save settings.
In
Security’ page
, user can change the camera’s name and password
(user name is always ‘admin’ and cannot be changed). You have to
input the same password in both
New Password
and
Confirm
Password
field, or you’ll be prompted to input new password again.
Click
OK
to save settings or click
Cancel
to discard changes.
