User’s Manual of ICA-2200
42
White Balance
Auto: will adjust the white balance automatically.
Hold: will hold the white balance.
Iris/Exposure
Control
This Camera is built-in a DC-Iris lens. User can choose the
Iris control mode from “Auto” or “Off”. In case, the “Auto”
mode is selected, th e Camera will control DC Iris
automatically. On the h and, if the “Off” mode is selected,
the Camera will open the lens Iris to maximize.
Sometimes, the Auto Iris may work abnormally under some
environments. In this case, user can click “Calibrate” button
to adjust Auto Iris function again.
Maximum Exposure
Time
User can limit the ma ximum exposure time of the image
sensor. The larger value means longer exposure time
possibly.
Power Frequency
Frequency of power line: 50 or 60Hz.
Color Level
Large value will be colorful.
Hue
Change the value will result to color tuning.
Brightness
Large value will brighten camera.
Contrast
Large value will contrast camera heavily.
Sharpness
Large value will sharpen camera.
3D De-Noise
3D De-Noise can remove or lower unwanted noise and
preserve fine details and edges.
ICR
Use built-in photo sensor or manual to control ICR.
In case use r selects manual mode, there are 4 modes:
Night (On), Day (Off), Auto or Schedule to control built-in IR
LEDs. This function is very useful under low illumination
environment even 0 Lux.
In case the Auto mode is selected, user needs to specify 3
parameters in advance:
Night Mode Threshold (0~10000):
this valu e set the
threshold to turn on IR LED. It should be lower or equal to
Day Mode Threshold.
Day Mode Threshold (0~10000):
this value set the
threshold to turn off IR LED. It should be higher or equal to
