9
2.3.6 After the above steps have been done, place the ICA-2250VT on the wall
with the four screws tightened.
Note
Please make sure the hardware had been located on the wall
properly. If the hardware drops down, it is possible make someone
injury or hurt. Please check the hardware again after the installa-
tion.
2.3.7 Now connect it to 802.3at PoE switch by means of the LAN socket located
on the ICA-2250VT’s back panel via an Ethernet cable to enable to power up
the operation.
2.3.8 Through the search utility, use PLANET IPWizard II to get the IP of the
ICA-2250VT and use browser to connect the ICA-2250VT to the Web.
2.3.9 Adjust zoom and focus of the camera to get a perfect video.
2.3.10 Done.
