3.11 E-Mail Configuration
You may setup SMTP mail parameters for further operation of Event Schedule. That’s, if users
want to send the alarm message out, it will need to configure parameters here and also add at
least one event schedule to enable event triggering.
SMTP Server
Type the SMTP server name or the IP address of the SMTP server.
Test
Send a test mail to mail server to check this account is available or
not.
SMTP Port
Set port number of SMTP service.
SSL
Enable SSL function or not.
SMTP Authentication
Select the authentication required when you send an e-mail.
Disable:
If no authentication is required when an e-mail is send.
Enable:
If authentication is required when an e-mail is sent.
Authentication User
Name
Type the user name for the SMTP server if Authentication is
Enabling.
Authentication Password
Type the password for the SMTP server if Authentication is
Enabling.
E-mail From
Type the sender’s E-mail address. This address is used for reply
e-mails.
E-mail To
Type the receiver’s e-mail address.
62
