8
4. Terminal Setup
It is optional for you to configure the system by connecting a serial
cable (not included in the package) to a
COM port
on a PC or
notebook computer and to the serial port of the Cellular Gateway.
ICG-2420-LTE
COM1
115200, N, 8, 1
PC/Workstation with
Terminal Emulation Software
Serial Port
RS232 DB9 Cable
Figure 4-1:
Cellular Gateway Console Connectivity
A terminal program is required to make the software connection to the
Cellular Gateway.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port
should be configured as:
Baud: 115200
Data bits: 8
Parity: None
Stop bits:1
Flow control: None
Figure 4-2:
COM Port Configuration
