46
Parameter Description
Answer Mode
(Operation Mode)
Each CO line can operate in one of the following modes.
Shutdown
:
This line is totally disabled
–
usually used for unconnected CO ports.
Dial In Only
:
This line can only be used to receive calls.
Dial Out Only
:
This line can only be used to make calls.
Two-Way
:
This line can be used to both receive and make calls.
Direct Ring (Ring Through)
:
This line is two-way, but incoming calls on this line will be transferred to the
Ring Through Extension (see below) directly, bypassing the system
’
s auto
attendant.
Voicemail (Ring Through Voicemail)
:
This line is two-way, but incoming calls on this line will be transferred to the
voicemail box for the
Ring Through Extension
directly, bypassing the system
’
s
auto attendant.
Operator Voicemail
Enable operator voicemail if the operator fails to answer the call.
Caller ID
IPX-1000 supports the following three caller ID types: FSK, DTMF before ring,
DTMF after ring. Please check with your local phone company to find out
which type is used in your area. The caller ID information will be passed
through to the extension if
Caller ID Pass Through
function is enabled (please
refer to
“
PBX config
”
).
Ring2Ext/VMail (Ring
Through Extension)
Specify which extension the ring through functions will use for this particular
CO line.
DONE
Clicking on the
DONE
button to apply the changes.
Extension line configuration
Please clicking Extension line telephone icon to enter into
Ext xxx configuration:
Summary of Contents for IPX-1000
Page 1: ...Internet Telephony PBX System IPX 1000 User s manual ...
Page 35: ...31 ...
